.

THE MANUFACTURING PROCESS

THE PROCESS BEGINS WHEN THE GEL COAT & VINYLESTER BARRIER ARE SPRAYED.

THE FOAM CORE RENDERS A STRONG, DURABLE VESSEL & IS COST-EFFECTIVE.

INSTALLING PEEL-PLY & INKAMAT HELPS RESIN FLOW UNDER THE VACUUM BAG.

SHORTLY AFTER INSTALLATION, EPOXY RESIN BEGINS TO FLOW THRU THE MATERIAL & CORE.

INSTALLING THE VACUUM BAG IS  THE MOST TIME CONSUMING STEP IN THE PROCESS.

THE BAG CREATES PRESSURE & RESIN PASSES THRU THE LAMINATE WITH NO VOIDS.

NEAR COMPLETION...

ALL RESIN TRANSFERRED THRU MATERIALS IN LESS THAN AN HOUR!

THE HULL & DECK SEAMS ARE TRIPLE LAMINATED FOR EXTRA STRENGTH & STABILITY.

4", 8" & 12" MULTI-DIRECTIONAL LAMINATES SURROUND THE ENTIRE PERIMETER OF THE HULL.

ALMOST DONE!

THE FINISHED HULL IS NOW REMOVED FROM THE MOLD.

THE HULL IS PRIMED & SANDED 3 TIMES BEFORE BEING SPRAYED WITH MARINE URETHANE PAINT.

Sales & Service

VICIOUS CUSTOM BOATS LLC

14047 C.R. KOON HIGHWAY

NEWBERRY, SC 29108

Manufacturing & Sales

INFUSION MARINE LLC

991 EAST SAMPLE ROAD

POMPANO BEACH, FL 33064

Billing

1946 DREHER ISLAND ROAD

PROSPERITY, SC 29127